Description
Sulzer Centrifugal Submersible dewatering pumps Submersible drainage pump XJ 110 -Guaranteed peak performance
Key Technical Specifications:
50HZ
| Electric submersible pump | XJ 110 |
| Maximum submergence | 20 m |
| Protection class | IP 68 |
| Max. temperature of pumped medium at max. power input and continuous duty | 40ºC |
| Max. media density | 1,100 kg/m3 |
| pH of the pumped medium | 5-8 |
| Strainer hole | 7.5 x 22 mm |
| Max number of starts | 30/hour |
| Motor rating P2 | 11.8 kW |
| Speed | 2,920 rpm |
| Power cable | 20 m type H07RN8-F |
60HZ
| Electric submersible pump | XJ 110 |
| Maximum submergence | 20 m |
| Protection class | IP 68 |
| Max. temperature of pumped medium at max. power input and continuous duty | 40ºC |
| Max. media density | 1,100 kg/m3 |
| pH of the pumped medium | 5-8 |
| Strainer hole | 7.5 x 22 mm |
| Max number of starts | 30/hour |
| Motor rating P2 | 13.5 kW |
| Speed | 3,500 rpm |
| Power cable | 20 m type H07RN8-F |
Why Choose the Sulzer XJ 110 Submersible Pump
The XJ 110 delivers robust, high-performance dewatering for construction, mining, tunneling, and heavy-duty drainage scenarios:
Engineered to handle water and dirty water with light abrasives reliably under continuous or low‑water conditions.
Available with AquaTronic electronic control (built-in or optional), which corrects phase order, starts the pump safely (direct or soft start depending on unit), and protects against high temperature, overload, missing phase, clogging, and dry running.
Plug‑and‑pump installation simplifies setup—no external starter panel needed. Diagnostic status, fault logs, and maintenance history are accessible via USB without pump disassembly.
Modular construction allows easy maintenance, minimal spare parts, and quick conversion to different hydraulic configurations.
Technical Specifications
Feature Specification
Motor power (50 Hz) 11.8 kW at 2,920 rpm
Motor power (60 Hz) 13.5 kW at 3,500 rpm (≈ 18 hp US version)
Max flow (50 Hz) ~54 L/s
Max head (50 Hz) ~52 m
Max flow (60 Hz) ~55 L/s (≈ 873 gpm)
Max head (60 Hz US) ~63 m (≈ 207 ft)
Free passage (solids) ~48 × 60 mm
Weight (without cable) ~81 kg
Protection rating IP 68 — submersible up to ~20 m
Max medium temperature ~40 °C continuous duty
Medium density and pH range ≤ 1,100 kg/m³; pH 5–8
Max start cycles/hour Up to 30
Features & Options
AquaTronic versions include automatic phase-rotation correction, overload/missing-phase/dry-run protection, integrated starter, and anti-clog backspin.
Level‑sensor configurations (e.g. AquaPlug combos) support fully automated start/stop by liquid level, dry‑run protection, energy‑saving modes, and fault indication via LEDs/logging.
Discharge options available: 3″ (HD), 4″ (ND), or 6″ (LD) hose or threaded connections in BSP, NPT, or Storz coupling types.
Accessories: flotation systems, zinc anode kits for corrosion protection, service data kits, surface protection coatings.
Materials & construction: aluminium casing, stainless‑steel shaft and hardware, white cast‑iron impeller, nitrile rubber wear parts, dual mechanical seals in oil bath (silicon carbide primary/secondary).
